Bo mạch chủ - Mainboard GIGABYTE C621-SU8 (rev. 1.0)

1st and 2nd Generation Intel® Xeon® Scalable Processors, LGA 3647 Socket P (Narrow) with 2 UPI support of up to 10.4 GT/s, CPU TDP support up to 165W

Intel® C621 Chipset

- 8 x DDR4 DIMM sockets supporting up to 1 TB of system memory 6 channel memory architecture
- Support for DDR4 2666 MHz memory modules if use a Skylake CPU
- Support for DDR4 2933 MHz memory modules if use a Cascade lake CPU
- Support for ECC RDIMM/RDIMM 3DS/LRDIMM/LRDIMM 3DS memory modules

ASPEED® AST2500:
- 1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz

Realtek® ALC1220-VB2 codec
* The back panel line out jack supports DSD audio High Definition Audio 2/4/5.1/7.1-channel Support for S/PDIF Out

1 x Realtek RTL8211E chip (10/100/1000 Mbit) (LAN1)
2 x Intel® 210AT GbE LAN chips (10/100/1000 Mbit) (LAN2, LAN3)

1 x PCI Express x16 slot, running at x16 (PCIEX16_5)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_3)
2 x PCI Express x8 slots, running at x8 (PCIEX8_4, PCIEX8_6)
1 x PCI Express x8 slot, running at x4 (PCIEX4_2)
(All of the PCI Express slots conform to PCI Express 3.0 standard.)

Chipset:
1 x M.2 connector (Socket 3, M key, type 2260/2280 SATA and PCIe x2 SSD support) (PCIEX2_M2)
1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 PCIe x4/x2 SSD support) (PCIEX4_M2)
2 x SATA 6Gb/s connectors (S-SATA0~1)
6 x SATA 6Gb/s connectors (I-SATA0~5)
Support for RAID 0, RAID 1, RAID 5, and RAID 10

Chipset
+ ASMedia® USB 3.1 Gen 2 Controller:
2 x USB 3.1 Gen 2 Type-A ports (red) on the back panel Chipset:
5 x USB 3.1 Gen 1 ports (2 ports on the back panel, 1 port onboard, 2 ports available through the internal USB header)
2 x USB 2.0/1.1 ports available through the internal USB header

1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x CPU fan header
6 x system fan headers
8 x SATA 6Gb/s connectors
2 x SATA DOM power headers
2 x M.2 Socket 3 connectors
1 x front panel header
1 x front panel audio header
1 x USB Type-C™ port, with USB 3.1 Gen 1 support
1x USB 3.1 Gen 1 header
1 x USB 2.0/1.1 header
1 x Thunderbolt™ add-in card connector
1 x Trusted Platform Module(TPM) header (2x6 pin, for the GC-TPM2.0_S module only)
1 x serial port header
1 x chassis intrusion header
1 x Clear CMOS jumper
3 x SATA SGPIO headers
1 x BMC_VGA jumper
1 x BMC_WATCHD jumper
1 x wake on LAN header
1 x IPMB connector
1 x SMB jumper
1 x VRM SMB Clock jumper
1 x VRM SMB Data jumper
1 x Intel® VROC Upgrade Key header
1 x NVMe SMBus (I2C) header
1 x buzzer
1 x NVMe SMBUS Control header

1 x D-Sub port
1 x serial port
1 x UID button
2 x USB 3.1 Gen 2 Type-A ports (red)
2 x USB 3.1 Gen 1 ports
3 x RJ-45 ports
1 x optical S/PDIF Out connector
5 x audio jacks

ASPEED® AST2500 BMC chip

Voltage detection Temperature detection Fan speed detection Fan speed control
* Whether the fan speed control function is supported will depend on the fan you install.

1 x 256 Mbit flash Use of licensed AMI BIOS PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Operating temperature: 10°C to 40°C
Operating humidity: 8 - 80%
Non-operating temperature: -40°C to 70°C
Non-operating humidity: 5% - 95%

Support for Windows 10 64-bit

ATX Form Factor; 30.5cm x 24.4cm